Subtotal:
$0.00
- IEC62386 V2 PIR sensors
- IEC62386 V2 lux sensor
- IEC62386 colour sensor
- Smart IEC62386 switch
- Smart IEC62386 sensor with dusk
- Digital Addressable Lighting Interface edition 2
- IEC62386 emergency with smart charge
- Selectable constant power
- Selectable constant current
- Self-test emergency
- Power measurements
- DT6 or DT8 modes
- Wireless support
- Twin luminaire
- Driver link
Add a Smart sensors
For max. power savings
Increase the building’s awareness of its occupants with a sensor per fitting, allowing shorter idle times and less false triggers.
Use motion and light sensors to reduce the energy consumption of the building’s lighting. Sense light and colour everywhere in the building, with the zencontrol smart sensor you get per fitting lux control for the best results when daylight harvesting. Use the colour sensor to understand how the CRI has changed over time.
-
Occupancy maps
Visual reports of an areas utilisation, perfect for designers and building managers looking to better understand their building usage
-
Cloud
Gain better occupancy data on the cloud with a per fitting solution
-
Energy savings
Improve the buildings energy savings with per fitting dimming, daylight harvesting and motion detection
-
Plug-in smart nano sensor
Made as an inbuilt solution, discover how well the the Plug-in Smart PIR nano sensor works.
-
Plug-in smart microwave sensor
Available soon: the Plug-in smart microwave sensor, perfect for integration into battens.
-
Plug-in smart sensors
Explore the Plug-in Smart PIR sensors wide range of mounting options and features.
zencontrol has perfected “sensor per-fitting” technology with its Smart driver.
Sensor-Per-Fitting-Solution
Developed as a factory fitted, standardized, plug & play driver, the zc-smart-driver is a Digital Addressable Lighting Interface version 2 (IEC62386 V2) compliant solution that offers a lower overall cost of installation, reduced purchase price and lower commissioning cost linked to each individual light fitting and sensor, now operating as a single unit.
zencontrol has tried to help by highlighting common issues related to design, cost and operation when combining a sensor, in a short explainer-video.
Sensors are fitted with an infrared receiver that allows them to be used in conjunction with an IR control unit
Basic IR control
The hand-held zc-ir-ctrl remote is fitted with 24 buttons that provides basic luminaire programming functions. This includes 16 pre-configured features and up to eight custom programmable button features.
Extensive IR control
The hand-held zc-ir-ctrl-com remote is fitted with 44 buttons that provides extensive luminaire programming functions ideal for commissioning.
Add a Smart emergency
Turns your luminaire into a fully compliant emergency fitting
Add a battery to turn your luminaire into a fully compliant emergency fitting with full IEC62386 compliance to device type 1.
-
Plug-in smart exit
A simple setup unlike any other exit, with multiple mounting options
-
Plug-in smart emergency
Well suited for OEM installations, it adds emergency to any product
-
Plug-in smart spot
There is not a spot this little emergency luminaire wont fit, small and discreet.
The Smart spot, emergency luminaire, is perfect for pairing with a Smart Driver and converting traditional lighting into emergency.
Plug-in smart spot
When using a smart plug-in emergency option, the driver supports IEC62386-202, device type 1 allowing for emergency testing and management. Additionally, the driver can perform as a self-test unit or in standalone configuration.
The Smart Spot can be built into a light fitting or comes with a wide range of mounting accessories: recessed, surface, conduit mount.
All you need to do is plug into the Smart driver using the supplied RJ12 cable and its ready.
Plug-in smart exit
Like the other accessories the zencontrol Slimblade Smart Exit is also a simple plug and play solution. The exit is IEC62386-202 device type 1 with easy plug-in upgrades for battery and test switch.
Expanded functionality
A driver unlike any other
The Smart driver has two independent outputs allowing optimal performance and correct control of each luminaire.
Dual luminaire
Traditionally, two light fittings connected to a single driver has been problematic. In a series connection, a single fitting failure would result in both fittings failing, while in a parallel connection, voltage drop and loading would cause significant issues. zencontrol’s solutions avoids this, in the event of a single luminaire failure the second luminaire will continue to function.
-
Cloud
Test and monitor your emergency fitting using zencontrol Cloud
-
Double string
Add a second string and the driver becomes a DALI device type 8 device automatically, allowing for application which require tuneable white.
-
Single string
With only a single LED string connected the driver works as a standard DALI device type 6 LED driver.
Dual colour output
The smart driver supports two individual channels of lights allowing for circadian rhythm installations, device type 8
Power measurements
The driver and sensor can record several key elements, which when sent to the zencontrol Cloud provide valuable information. For example each smart driver can measure and report on its own power consumption allowing for a better understanding of the buildings energy consumption.
- Per fitting power usage
- Lamp life and emergency lamp data
- Lifetime data of the product including reliability
- Activity and occupancy heat mapping
- Lux level readings (avg/min/max)
Add value to your luminaire with the smart ports on the zencontrol Smart driver.
Add a DALI sensor / switch
Connect standard switches or 240 V sensors directly to the luminaires and have them operate as fully compliant IEC62386 version 2 devices that can control anything on the DALI line.
Utilise the lux feature found in most 240 V sensors to enable dusk mode on the sensor.
zencontrol smart drivers allows for third parties to add an IoT extension without adding external power supplies or other bulky accessories.
Third party IoT ready
Third party manufactures can communicate directly with the smart driver over the UART connection, which uses IEC62386-104 to send DALI packets directly to the driver.
This high speed connection allows for faster access and control with the driver and provides sensors and switch feedback directly to the IoT extension.
zencontrol’s Smart driven can be upgraded to Wireless with a wireless clip-in module
Wireless upgrade module
An upgraded Smart driver provides a single converged driver to meet most OEM requirements.
Current generation emergency products from Ektor, GEN III and above, can also be upgraded for use in wireless emergency testing and control systems with the same clip-in module.
Achieve a smart room configuration without the need for complex lighting control system.
Driver link
-
Expandability
Connect a DALI control system for expanded functionality, monitoring and control (optional).
-
Driver link connection
Connect two drivers together via an RJ12 driver-link cable to suit a small office.
-
Slave luminaire (optional)
Slave luminaire connected to the second output channel on the driver (max 2x20W).
Select your output
With easily selectable jumpers an OEM can choose the power or current that suits the application.
Constant current
Select from a range of constant current settings
Constant power
Choose to run your zencontrol driver in constant power mode for better results
Fine selection
Use the our tools to adjust the output current to the precise requirements in 10 mA increments
Multiple installation methods
Designed for OEMs in mind
OEMs have the choice of installation methods to best suit the application.
With a soft-wired driver an installer can choose their cable system independent to the luminaire.
Push terminals
Plugs
Screw terminals
Make it wireless
Make your system wireless by combining the Smart driver with our other different wireless products.
Resources
Check out more information and downloads related to the smart driver.
Explore the range
Check out the Smart driver and its wide range of accessories
